PHONE:

+393288075617

Address:

Via Bassetta 3
43037 Lesignano de' Bagni
Italy

email:

info@bioceramic.dental

Follow us:

Facebook-f Twitter Skype
Bioceramic - AndromedaNanotech

1200 Mpa Plus

Best Practice & Documentation

Coloring

The coloring process relies mostly on the types of shades. Usage of shades provided from water (HdueO) based products is advised, along with the brush technique rather than immersion to avoid too intense coloring. After the coloring process, the material is dried under drying lamps or melting machines with a maximum 150° for 30/180 minutes per second of artifact’s volume.

Frame Work

After sintering, work with diamond burs or elaboration stones for Zirconia, without overheating the piece, by milling under water jet. Sandblasting with 50-micron aluminum oxide at 2/4 bar is advised before polishing

Polishing

Polishing in an ambience of 900°/930° with a rising temperature not superior to 25°/30° if the artifact is more than 5 units is advised, and a slow cooling process up to 200° is peremptory. Should take out the piece from the melting machine when cooled down

Info